Rubber Injection
Molding
Quality Custom Rubber
Molding Services
Since 1976.
ISO 9001:2008
Rubber Injection Molding.
Rubber Injection Molding is an ideal process for forming high volume production, large quantities of small to medium size parts, complex inserts, close dimensional tolerances, insert molding and components that require uniformity. Rubber injection molding is particularly suited for products similar to the grommets shown above.
Door Stop
Manufactured by rubber injection molding utilizing color compounds, molded in multiple colors including green, yellow, beige, red, blue and brown.
The process of rapidly forcing an exact amount of rubber from a tube/cylinder into a closed, heated mold. This process provides economical advantages including:
- Short molding cycle
- Lower unit cost
- High dimensional tolerances
- Absence of flash
- Little scrap/waste
CLICK HERE to view our photo gallery of parts produced by all three major rubber molding processes.
Contact a member of our technical staff at (330) 336-6777
or CLICK HERE to send us a drawing.
AMERICAN MADE PRODUCTS FROM AN AMERICAN OWNED COMPANY.
Our technical staff is available to answer any questions call (330) 336-6777, fill in the form below or CLICK HERE to send us a drawing.
Large Press Capability
We can support your largest part requirements with the ability to run 42” x 42” and 48” x 56” molds on our transfer molding and compression molding equipment.
Large Shot Capability
Rubber Injection Molding 10lb – 15lb – 20lb shot size
- Qualiform Rubber Molding, Inc.
- |
- 689 Weber Drive
- |
- Wadsworth, Ohio 44281
- |
- P: (330) 336-6777
- |
- F: (330) 336-3668