| |
Compression Molding is the original production
method for molded rubber. It is ideal for low to
medium volumes and a useful molding process for
forming bulky parts, gaskets, seals and O-rings. It
is a widely used, efficient, economical production
method for many products particularly
low production volumes of medium to large parts,
materials with a high cost and applications that
demand extreme hardness. The process involves
compressing preformed rubber in a mold with a press.
During the compression process, rubber is forced
into the mold cavity to form the final product.
Component for Agricultural Equipment Rubber to
metal compression molding
Large Press Capability
Transfer and compression
molding equipment with the
ability to run 42” x 42” and
48” x 56” molds to mold
your largest part requirements. |
|
Large Shot Capability
Rubber Injection Molding
10lb – 15lb – 20lb shot size |
Rubber Compression Molding offers advantages over
other methods by providing:
-
Tooling savings
- Short
setup time (saves on short production runs)
-
The capacity to process stiff, high durometer
materials
-
Least amount of waste
|
